In the guide
Note: although the United Kingdom has left the European Union, certain EU laws (known as 'retained' laws) will still apply until such time as they are replaced by new UK legislation; this means that you will still see references to EU legislation in our guidance.
This guidance is for England, Scotland and Wales
There are a number of labelling requirements for toys, including the name and address of the manufacturer / importer, the type, batch, model or serial number, the UKCA mark, and warnings and instructions.
The Toys (Safety) Regulations 2011 set out the legal requirements for the safety of new toys supplied by a business. Toys are defined as "products designed or intended (whether or not exclusively) for use in play by children under 14 years old".
There are slightly different requirements for second-hand toys as they are not covered by the same Regulations as new toys.
All new toys that you supply in the course of a business must be marked with:
- the name and address of the manufacturer, or if the manufacturer is outside of the UK, the name and address of the manufacturer and the importer into the UK
- type, batch, serial or model number
- the UKCA mark
The UKCA mark is a declaration by the manufacturer that the toy is safe.
These marks must be on the toy or its packaging and be permanent and easy to read.
On small toys these marks may be on:
- a label attached to the toy
- an accompanying leaflet
Where Northern Ireland is involved, there is a further mark that is used: the UKNI mark.
There will be a crossover period for the UKCA and UKNI marks, and in most cases the CE mark can still be used until 31 December 2021.
For more information on the UKCA, UKNI and CE marks, please see 'Product safety: due diligence'.
Warnings and instructions
Some toys must come with warnings and instructions about precautions that need to be taken to ensure safe use. Special warnings are required as follows (and where specific instructions are required, you should seek further advice or refer directly to the Regulations):
- toys that are not suitable for children under three require a warning to this effect, plus the reason why - for example, choking hazard. This can be in the form of a pictogram or words (this symbol should never be found on toys that are suitable for children under three, such as rattles, teethers and soft-bodied toys)
- swings, slides and similar toys require instructions for assembly, and for periodic checks and maintenance
- 'functional' toys (those that are used in the same way as, and are often scale models of, appliances or installations intended for adults) require the following marking: 'Warning: to be used under the direct supervision of an adult'. They also require specific safety instructions and an indication that they must be kept out of the reach of very young children
- toys containing inherently dangerous substances or preparations (such as chemical toys) require specific safety instructions, a statement of a minimum age limit for use and a statement that the toy is to be used under adult supervision. Where appropriate, additional requirements as to labelling and packaging may apply under Regulation (EC) No 1272/2008 on classification, labelling and packaging of substances and mixtures
- toys such as skateboards or skates require specific instructions and the following marking: 'Warning: protective equipment should be worn. Not to be used in traffic'
- toys for use in the water (such as rubber rings) require the following marking: 'Warning: only to be used in water in which the child is within its depth and under adult supervision'
Toys that are second-hand are covered by the General Product Safety Regulations 2005 - rather than the Toys (Safety) Regulations 2011 - and as such do not need to be labelled with the UKCA mark or the address of the manufacturer / importer, although they must still be safe. The special warnings and instructions (see above) are required for both second-hand and new toys.
You are advised to only sell second-hand toys that are UKCA marked, contain any relevant instructions or warnings and have been checked for any obvious faults.
When you have reason to believe a toy is unsafe and presents a risk - for example, you receive a complaint that a toy has injured a child - you must:
- inform trading standards and your supplier of the risk
- withdraw the toy from sale, if appropriate
- provide trading standards with information about:
- the risk presented by the toy
- the non-compliance in question
- any actions taken
Your local trading standards service may request cooperation in relation to any action undertaken.
You must ensure that whilst a toy is under your responsibility the conditions under which it is stored or transported will not jeopardise the toy's safety.
Finally, for a period of 10 years, you must be able to identify the business that supplied you with the toy (in other words, you need to keep invoices etc).
Failure to comply with trading standards law can lead to enforcement action and to sanctions, which may include a fine and/or imprisonment. For more information please see 'Trading standards: powers, enforcement and penalties'.
Regulation (EC) No 1272/2008 on classification, labelling and packaging of substances and mixtures
Last reviewed / updated: January 2021
In this update
The United Kingdom has left the European Union and the post-Brexit transition period has ended; the content has been updated to reflect this